Post by skyship on Apr 28, 2014 1:38:04 GMT -5
Well, a review of this silica aerogel business. Aerogel from droplets, maybe?
www.carnicom.com/morgellonstimelapse.gif
Clifford Carnicom-
The time lapse video covers a period of approximately six hours and compresses the time into approximately one minute with 30 frames. The video images are time stamped in the lower right hand corner. The time interval between successive images is approximately 12 minutes. At approximately one hour into the sequence, extending filaments can be clearly seen (left center) to emerge from a primary filament. The network continues to densify from that point forward. The width of the primary filament (larger size) is approximately 12 microns in thickness, which is in accord with previous measurements for the encasing or bounding filament from direct biological samples. A reasonable estimate of the narrow filaments is on the order of sub-micron to micron range, also in accordance with previous measurements of the sub-micron internal filament network.
From the discovery shown here, it would appear that the encasing filament serves to provide feeder or extension filaments which serve to extend the growth of the pathogen. The estimated growth rate of the extension filaments on this particular culture is on the order of 50 microns per hour, or roughly the width of a thin human hair per hour.
www.biology-online.org/biology-forum/about15314.html?p=107919&hilit=Micron
Raw Soot nanotubes:
So, Raw soot from your chimney is no longer dangerous, since that is what is coming down in Aerosol operations along with their aerogel monomers. Sequestering carbon to dump it back down as soot.
Cenospheres. Are these harbored inside the aerogel monomers?
www.nist.gov/mml/msed/cnt-122011.cfm
www.nist.gov/mml/msed/images/11MML036_nanotubes_srm_LR.jpg
nanotube aerogel filaments? GIGS up~!~!~!~!~! Get it folks. They are dumping them right back down on us in the aerosol operations. But, now they are programmed.
www.damascusfortune.com/technology.html
Any questions?
www.carnicom.com/morgellonstimelapse.gif
Clifford Carnicom-
The time lapse video covers a period of approximately six hours and compresses the time into approximately one minute with 30 frames. The video images are time stamped in the lower right hand corner. The time interval between successive images is approximately 12 minutes. At approximately one hour into the sequence, extending filaments can be clearly seen (left center) to emerge from a primary filament. The network continues to densify from that point forward. The width of the primary filament (larger size) is approximately 12 microns in thickness, which is in accord with previous measurements for the encasing or bounding filament from direct biological samples. A reasonable estimate of the narrow filaments is on the order of sub-micron to micron range, also in accordance with previous measurements of the sub-micron internal filament network.
From the discovery shown here, it would appear that the encasing filament serves to provide feeder or extension filaments which serve to extend the growth of the pathogen. The estimated growth rate of the extension filaments on this particular culture is on the order of 50 microns per hour, or roughly the width of a thin human hair per hour.
www.biology-online.org/biology-forum/about15314.html?p=107919&hilit=Micron
Raw Soot nanotubes:
So, Raw soot from your chimney is no longer dangerous, since that is what is coming down in Aerosol operations along with their aerogel monomers. Sequestering carbon to dump it back down as soot.
Cenospheres. Are these harbored inside the aerogel monomers?
The National Institute of Standards and Technology (NIST) has issued the world’s first reference material for single-wall carbon nanotube soot. Distantly related to the soot in your fireplace or in a candle flame, nanotube-laden soot is the primary industrial source of single-wall carbon nanotubes, perhaps the archetype of all nanoscale materials. The new NIST material offers companies and researchers a badly needed source of uniform and well-characterized carbon nanotube soot for material comparisons, as well as chemical and toxicity analysis.
www.nist.gov/mml/msed/cnt-122011.cfm
www.nist.gov/mml/msed/images/11MML036_nanotubes_srm_LR.jpg
nanotube aerogel filaments? GIGS up~!~!~!~!~! Get it folks. They are dumping them right back down on us in the aerosol operations. But, now they are programmed.
Damascus Fortune not only clean the planet, but have made the whole process of converting carbon emission profitable thus creating a new rush for trapping carbon emissions. We sequester carbon from carbon emitting industries and convert it into one of the strongest materials known to man – Carbon Nano tubes and Nano structures
Carbon nanotubes, carbon nanofibers, carbon microtubes, nanobeads etc which are allotropic forms of carbon are sought for many applications reflecting their novel mechanical, thermal and electrical properties including reinforcing, catalyst support, gas storage and electrochemical energy storage. Extensive research related to the unique mechanical and electrical behavior of carbon filaments thus has necessitated need for improved processes for preparation of carbon filaments.
The discovery of single walled carbon nanotubes (SWNT), multiwalled carbon nanotubes(MWNT), carbon fibers (CF) by Iijima has started extensive research in the field due to the promising physical properties of carbon nanotubes. Carbon nanotubes are categorized as single walled nanotubes (SWNT) and multiwalled nanotubes (MWNT). Single walled carbon nanotube (SWNT) is a single atom thick layer of graphite (graphene) rolled up such that the diameter is of the order of nanometers. The length to diameter ratio of these carbon filaments are of the orders of 1,000,000. Multi-walled nanotubes (MWNT) consist of multiple rolled layers (concentric tubes) of graphite. These cylindrical carbon molecules have unusual properties, which are valuable for nanotechnology, electronics, optics and other fields of material science and technology.
Carbon Nanotubes have also been found in the soot of Industries and places which burn Methane, benzene and ethylene, but the irregularities in size and quality is enormous due to highly uncontrolled environment.
Multi-walled nanotubes (MWNT) consist of multiple layers of graphite rolled in on them to form a tube shape. There are two models which can be used to describe the structures of multi-walled nanotubes. In the Russian Doll model, sheets of graphite are arranged in concentric cylinders, e.g., a (0.8) single-walled nanotube (SWNT) within a larger (0.10) single-walled nanotube. In the Parchment model, a single sheet of graphite is rolled in around itself, resembling a scroll of parchment or a rolled up newspaper. The interlayer distance in multi-walled nanotubes is close to the distance between graphene layers in graphite, approximately 3.3 A (330 pm).
The discovery of single walled carbon nanotubes (SWNT), multiwalled carbon nanotubes(MWNT), carbon fibers (CF) by Iijima has started extensive research in the field due to the promising physical properties of carbon nanotubes. Carbon nanotubes are categorized as single walled nanotubes (SWNT) and multiwalled nanotubes (MWNT). Single walled carbon nanotube (SWNT) is a single atom thick layer of graphite (graphene) rolled up such that the diameter is of the order of nanometers. The length to diameter ratio of these carbon filaments are of the orders of 1,000,000. Multi-walled nanotubes (MWNT) consist of multiple rolled layers (concentric tubes) of graphite. These cylindrical carbon molecules have unusual properties, which are valuable for nanotechnology, electronics, optics and other fields of material science and technology.
Carbon Nanotubes have also been found in the soot of Industries and places which burn Methane, benzene and ethylene, but the irregularities in size and quality is enormous due to highly uncontrolled environment.
Multi-walled nanotubes (MWNT) consist of multiple layers of graphite rolled in on them to form a tube shape. There are two models which can be used to describe the structures of multi-walled nanotubes. In the Russian Doll model, sheets of graphite are arranged in concentric cylinders, e.g., a (0.8) single-walled nanotube (SWNT) within a larger (0.10) single-walled nanotube. In the Parchment model, a single sheet of graphite is rolled in around itself, resembling a scroll of parchment or a rolled up newspaper. The interlayer distance in multi-walled nanotubes is close to the distance between graphene layers in graphite, approximately 3.3 A (330 pm).
www.damascusfortune.com/technology.html
Any questions?